Wooden staircases seem magnificent when they are installed properly. However you will need to have some preparation supporting you, to prevent possible accidents on the way.
A wooden staircase is fantastic at a family filled with adults, but it is not acceptable for families with pets, older residents or young children. In case you have some of the aforementioned, then contemplate wrought iron stairs, then it is a far safer choice. Wood, though amazing, may be notoriously slippery, so look at this before buy.
Solid or Engineered Wood?
As soon as you’ve settled on a wooden staircase, then you can choose between engineered or solid wood. Strong timber is just as its name implies. The stairs are trimmed from a solid plank of timber. Engineered timber relies on a blend of wood and other materials like MDF or plywood. Whichever way you move, you can make certain you’ll have a more visually-appealing and durable staircase.
The Step-By-Step Process
It is vital to find a good fix for the timber along the stairs base. Primarily, remove any padding and carpeting in the measures. Pull out any nails or staples. Then thoroughly wash the measures using a vacuum to eliminate any dust adhesive and wood particles. You then need to assess the riser at the base step, and reduce on some stair risers into the proper height. Next, fasten the stair risers into the measures and complete them hammering nails into the corners.
The following step is that the floorboards. Measure the surface out of the base step and then cut on the floorboards into shape with a circular saw. Then use a hot glue gun to fasten them into position on the measures. Following this nail the planks in using finishing nails. Afterward, it is just the finishing touches which stay.
The Bullnose Profile
In the event you decide to use good wood in your stairs, 1 benefit is that you are able to create the edging look appealing by employing a bullnose profile. This is a round edge on every step or tread which may be machined into wood. But if you are using engineered wood to your staircase, then it’s possible to produce a bullnose individually and attach it into the measures in the end. Irrespective of your strategy, the final result will be slick, modern and fashionable.
In the event you decide to utilize engineered timber, then you are going to create the Bullnose corner separately. Primarily, measure the measures using a tape measure. Then cut on a bullnose for every measure using a jigsaw. Apply paste to the back of this bullnose and push it into position on every step. Hammer finishing nails into the face of the bullnose. Next, the only part remaining, would be to put wood putty into every nail hole to disguise the holes.