The easiest way to see inside your pipes is to hire a plumber with a drain camera. A drain camera is a specialised camcorder that is inserted inside a drain pipe and provides a dwell video feed of what is going on inside the pipe.
Once your plumber has determined where the blockage is inside your pipework and what it is being caused by they are then able to habitually a high pressure water jetting machine inside your pipe which often can clear out the blocked pipe in an efficient manner. In the event you hire a plumbing company that carries these tools your own backed up toilet or blocked drain info can be cleared all in one visit, quickly and with little disturbance.
So what exactly is often a High Pressure Water Jetter?
A Water Jetter is a strain clearing machine that delivers water at very high tension and volume inside your blocked pipes that cuts away what ever is in its way. It runs around 5000psi which is a high pressure speed perfect for clearing blockages within pipework.
What is better – A Water Jetter or a Eel?
Electric Eels which are also referred to as a plumbing snake or a drain snake, is very abrasive to the inside of pipe joints. It operates by spinning its cable around on the inside of the drain pipe, which in turn rubs against the pipe. In the event the cable rubs in the same place for a period of time as it is pushed decrease the pipe work it can cut or crack the conduit and even punch a hole through the pipe.
A lot of plumbers today are still using the ‘old fashioned’ style Electric Eel method of clearing drains. Even though a High Pressure Water Jetter is overall much better technology and provides better results. You may be asking, “what is a better choice for clearing blockages. A Eel or a jetting machine? “
The advantages of using a Waters Jetter are:
The cost involved to get a pipe healed with a Water Jetter will mostly be cheaper than a stainless steel Eel because it generally takes less time to clear the blockage. The location of the blockage can be pin pointed with the drain video camera and then cleared with the Water Jetter. This allows the blockage for being cleared much quicker so you won’t be paying for hours and hours of your time.
The costs involved to get a pipe cleared with an Electric Eel are usually higher because Electric Eels can be very labour intense depending on the depth and location of the blockage and how bad often the blockage is. The Electric Eel can not be used aided by the drain camera and it does not flush the debris available while in operation. The clearing has to be done first, and the pipe work needs to be flushed before the drain camera is usually inserted to assess the cause and extent of the blockage. It indicates a lot of time wasted.
The Water Jetter is much speedier at clearing a pipe blockage. On average it usually takes all around 45-60 minutes to clear a blockage. The usual time you will need to clear blockages with an Electric Eel is very variable and depends on different factors such as the depth of the blockage and how undesirable the blockage is. Some blockages can take up to a entire morning to clear with an Electric Eel and often require hand as well as machine excavation to repair a badly blocked drain.
Top quality Clearing:
The Water Jetter is very effective at clearing pipes. It only requires water to scrub the inside of your pipes and it clears tree roots so well that the drain camera can no longer find them. It also cleans the walls of the pipe, washing aside built up waste, fats, oils and debris plus anything that may have built up on the pipe walls. The Water Jetter can travel up to 140 metres and maintains it has the effectiveness right to the end which is long enough to clear the majority of houses.
When a plumber uses an Electric Eel to clear a hindered drain or clogged drain it often leaves behind tree beginnings and other debris. This can lead to future debris and squander sticking on the uncleared roots and debris easily developing another blockage. The Electric Eel has a cable as well as cutting head that spins and smashes around inside pipe, banging and hitting the pipe walls. This can processor chip, cut and crack the pipes leading to further deterioration which can even collapse the pipes. The further any Eel travels up a pipe it loses its success and is usually no longer effective after 25 metres.